OEC Module C – Lighting Controls Implementation
(Difference between revisions)
|[unchecked revision]||[unchecked revision]|
|Line 1:||Line 1:|
==Schematic Design Phases==
==Schematic Design Phases==
;Control Design Intent Narrative
;Control Design Intent Narrative
Revision as of 12:07, 25 January 2011
PDF Download of this Document: http://elad.lbl.gov/images/
Schematic Design Phases
- Control Design Intent Narrative
- Plain language description of how the system is intended to operate, for use by design team and owner to promote dialogue and establish goals of the system.
- Objectives are discussed by space type and evolve throughout project design phases. Narrative will eventually ensure that all trades, disciplines, users and O&M staff understand the intended operation of the system.
- eLAD to show examples or templates.
- - Expected daylight levels and variation
- - Expected operation of blinds or shading devices
- - How the controls respond to daylight during normal operation
- - How the controls respond to operation of blinds
- - How the controls respond to daylight during testing/ calibration
- - How the controls respond to daylight during emergency
- - What overrides are available to the users and O&M staff
- - How the daylighting controls are combined with the other lighting controls
- - How the O&M Staff will receive and deal with user demands
- Establishing Initial Control Zoning
- Should tailor project for flexibility and maximum savings
- eLAD to show options and different approaches
- Design Development
- Approach several manufacturers with Narrative.
- How would they meet it? Discuss pros and cons of each.
Construction Drawings and Specifications
- Overall Objectives
- Be tight in the specs and drawings so that control objectives are met, a high level of Q&A is ensured before trades leave the building site/ building is occupied, and criteria are provided to qualify equipment and products for an intended purpose.
- eLAD to include examples of translating a narrative into a product spec, problem sets for typical spaces with control approaches (linking to elements of the Controls Design Module), and compatibility matrix.
- - Construction Documents – Zoning to show on electrical drawings. Electrical Engineer provides panel schedules and emergency interface.
- - Provide generic performance specifications for individual components. Should address features and capability: e.g. sensitivity of sensors, FOV of sensors, features for adjusting, control algorithm, fade rate, delay, dead band.
- - Standards, warranty: e.g. UL, 5 years etc.
- - Compatibility at the integrated systems level (e.g., EMCS, HVAC & façade systems)
- - Compatibility at level of component of a heterogeneous system related to networking communications protocols, power/ voltage, ballast > controller > sensor interoperability.
- - Plug and play systems, proprietary systems, physical connections, wireless, mixed-bag-of-nuts approach.
- Creating Adequate Specifications
- Specs should include requirements to clearly establish the roles and responsibilities of members of the project team during installation.
- - Requirement for a “primary” manufacturer or an “integrator” to take responsibility for total function and compatibility
- - Include Intent Narrative and require written statement of compliance with specs and narrative
- - Submittal Requirements to specify what the contractor will submit for approval at each stage of construction
- - Installation Requirements to specify means and methods for installation
- - Requirements for labeling of all manual controls, and clear labeling of electrical panels, control panels, and remote ballasts
- - Calibration Requirements to specify by whom, when and how the calibration will be done
- - Requirements for additional time from manufacturer’s field technician during final calibration and commissioning
- - M&V Requirements to specify how system will be verified prior to close of contract and to establish a method of proof for meeting specification, along with ensuring that the M&V systems needed to maintain performance over the life of the building are included in the scope: database, archiving, storage & retrieval.
- - Requirements for video taped training session, documentation of final settings, re-commissioning of system
- - Training Requirements to specify the level of training for operators (facility managers, building engineer) needed prior to hand-off to properly operate, adjust, and maintain the system over the life of the bldg.
- Costing & feedback at pre-bid meetings with bid contractors before project is bid on (Formulation of how product/ equipment is delivered)
- Bid package goes out (informational meetings, RFIs, to wring out uncertainties in the specifications, clarifications)
- Bid negotiations, approve contractor
- Review contractor’s plans, schedule, sequence, how trades come through
- Review contractor submittals for equipment, accept substitutions, approve final locations of sensors
- Ensure that procedures and requirements outlined in specs are followed by project team
- - Submittal of products for approval per submittal requirements
- - Ask for as-built control zone drawings if different from CDs
- - Installation of equipment per installation requirements
- - Calibration and testing of equipment per calibration requirements
- - Training of personnel per training requirements
- - M&V - verify before final sign-off of contract
- User / Occupant Manual
- Explain design intent to achieve buy-in. Provide instructions for operating specific equipment.
- - When should this manual be written?
- - What should it contain?
- - Who should write it?
- Complaint Guide
- How to respond to occupant complaints that may be due to qualitative issues.
- Operating and Maintenance Manual
- Compilation of all information relevant to operation of lighting system (provide electronic copy).
- - All equipment user manuals, trouble-shooting guides, and shop drawings
- - As-built equipment schedules for re-ordering
- - List of Reps and distributors
- - As-built drawings for hidden equipment, such as different ballasts, power packs, etc.
- - Intent Narrative
- - Final commissioning calibration settings and schedule for re-commissioning
- - Recommended cleaning and re-lamping schedules